Coated Belt Splicing Tape
ONE-WAY 2MF
2 mils (0.002”)*
50 microns
Very thin polyester film reinforced with ultra-thin polyester yarns for low profile joint thickness
Tensile strength: 115 lb/in (1005 Newtons/5 cm)
Belt grit range: 120 grit and finer (paper backings)

ONE-WAY 2F
3.0 mils (0.003”)*
75 microns
Thin polyester film reinforced with light-weight polyester yarns for reduced thickness and greater flexibility
Tensile strength: 200 lb/in (1750 Newtons/5cm)
Belt grit range: 120 and finer

ONE-WAY 4F
4.5 mils (0.0045”)*
112 microns
Polyester film reinforced with polyester yarns. Combines high strength and excellent flexibility for use on wide range of belts
Tensile strength: 280 lb/in (2450 Newtons/5cm)
Belt grit range: 60 - 120

ONE-WAY 6F
6.5 mils (0.0065”)*
165 microns
Polyester film reinforced with heavy-duty polyester yarns for extra strength.
Tensile strength: 350 lb/in (3500 Newtons/5cm)
Belt grit range: 24-80

ONE-WAY 8F
8.5 mils (0.0085”)*
215 microns
Abrasion resistant polyester film reinforced with heavy-duty polyester yarns for severe applications.
Tensile strength: 400 lb/in (3500 Newtons/5cm)
Belt grit range: 24 - 40

ADK-5PF
7.0 mils (0.007”)*
175 microns
Dacron® polyester fabric with good tensile strength and excellent flexibility required for narrow belts (under 1”)
Tensile strength: 260 lb/in (2275 Newtons/5cm)
Belt grit range: 60 and finer

ADK-4NNF
6.0 mils (0.006”)*
150 microns
Nomex-Nylon® fabric with excellent heat resistance and flexibility. Good for X, J weight and non-woven backings
Tensile strength: 190 lb/in (1660 newtons/5cm)
Belt grit range: 60 and finer

* Tape thickness is nominal prior to coating
® DuPont Registered Trademark